×

Меню

EO-10C

dehydrating elevator
Ask for price

Dehydrating elevator EO-10C is used for transportation
of concentration products of coal not larger than 150mm of size and volume mass of filled-up load not more than 1600 kg/m3 at 60-75° angle of dip with simultaneous dehydration.

 

By a client wish elevator can be provided both with buckets having a cap covering the bucket bottom which would keep the lower bucket off moisture from the upper bucket, and with buckets without a cap. Fastening the guide to sections can be done by welding or by bolts.

 

Inclined bucket elevator EO-10C consists of the following main parts:

  • drive section
  • speed gauge unit section
  • intermediate section
  • ntermediate collapsible section
  • tension section
  • bucket band

Description

 

Parameters Value

Rated output, t/h (m3/h) at bucket movement speed

 

   - of 0,17 m/sec

220 (140)

   - of 0,25 m/sec

320 (200)

Bucket

 

   - nominal width, mm

1000

   - nominal spacing, mm

400

   - capacity, m3, not less

0,1

   - speed, m/sec

0,17+10 %

Transported material piece size, mm, not larger

150

Angle of dip for elevator, degree

60-75

Transportation length (length between axles of drive and

tension shafts), mm, not more

25000

Rated power for electric motor, kWt, not more

55

Mass, kg, not more

40000

Specific electric power consumption in maximum

length and output, kilojoules/(t*m), not more

27,16

Corrected level of sound power, dB, not more

109

 

Note: maximum output is indicated for volume mass of filled-up load equal to 1600 kg/m3.

×
×
If you can not find the site
you are interested in product
«Send an application»
×